BARRIER® EasyWarm®

Stop the drop – perioperative patient warming

Effective, continuous patient warming helps managing the risk of hypothermia. It reduces the number of surgical site infections and other complications, reduces patient anxiety and improves recovery times. This means higher throughput of patients and saved resources. 

BARRIER® EasyWarm® active self-warming blanket provides a patient-warming solution that is both easy-to-use and designed for the whole perioperative environment. Once opened and unfolded, the blanket reaches operational temperature within 30 minutes and maintains an average temperature of 44C for up to 10 hours1.

Helps prevent hypothermia in the perioperative setting 1

Easy and quick set up to save time

Easy to use before, during and after surgery for efficient patient warming

Easily available to more patients thanks to no need for additional equipment

BARRIER EasyWarm active self-warming blanket benefits

Dr. Mark Kyker, Cardio Thoracic Anesthesiologist

02:18
(mm:ss)

Where does the heat in the blanket come from?

  • The heat of the active self-warming BARRIER EasyWarm blanket is produced via an exothermic chemical reaction initiated by exposure to air, resulting from the oxidation of iron.
  • The contents of the warmers are all-natural: activated carbon, iron, water, salt, clay and the chemicals are securely contained in 12 separate pockets.
  • The pockets are designed and positioned to provide the maximum heat transfer in the most efficient manner. Average temperature of 44ºC is reached within 30 minutes.

Product description

  • 12 air activated warming pads (13cm x 10cm) integrated into pockets of the top layer.
  • Blanket size is 152cm x 92cm.

Material

  • Several layers of SMS (polypropylene). The layers and pockets are sewn together with polyester/cotton threads.
  • The warming pads are made up of air permeable bags that contain active coal, clay, salt and iron powder.

Packaging

  • Vacuum packed into an airtight polymer bag. The polymer bags are wrapped in bubble wrap and packed into a transport box.
  • 10 single packed products in each transport box.

1. Clinical to assess the safety and efficacy of an active self-warming blanket used to prevent hypothermia. Data on file. 2012.

Clinical study assessing the safety and efficacy of BARRIER EasyWarm

Instructions for use

Read instructions on how to use BARRIER EasyWarm and BARRIER EasyWarm+.
General information
  • Do not fold the blanket over itself.
  • Remove from patient before X-ray or MRI is needed since the warming pads are not translucent.
  • Warming pads should be placed facing up.
  • It is recommended to avoid direct skin contact in areas with bruising, swelling and frostbite. In patients with impaired sensibility, reactivity or communication, skin response should be monitored regularly in accordance to hospital protocol.
  • After use, dispose BARRIER EasyWarm with regular waste. Possible to incinerate.
  • To be handled under supervision of healthcare provider. 

Precautions

  • BARRIER EasyWarm is not designed to be used on children.
  • If prolonged hypotension can be expected, use of the blanket should be avoided.
  • The blanket should not be used in cases of severe peripheral vascular disease.

Product specification

Reference number 629900-00
Share this

Learn more

Study shows BARRIER® EasyWarm® single-use...

A study presented at the Post-Graduate Assembly (PGA) in Anesthesiology...

e-Learning: Learn about inadvertent perioperative...

Inadvertent perioperative hypothermia is bad. With Mölnlycke Health Care’s...

Why is it so important to avoid mild hypothermia

The 2013 Euroanaesthesia Congress was held in June in Barcelona, Spain....

How to use BARRIER® EasyWarm®

Learn how to use BARRIER® EasyWarm® active self-warming blanket for easy...

How to use BARRIER® EasyWarm®+

Learn how to use BARRIER EasyWarm+ active self-warming blanket for easy...

Easy and effective patient warming

Effective, continuous patient warming helps managing the risk of hypothermia....